SEIKOM-Electronic GmbH & Co. KG
SEIKOM-Electronic GmbH & Co. KG Airflow Sensors
Airflow Sensors
|
Type
|
Media |
Immersion depth (ca.) in mm |
Material sensor tube |
Media temperature in °C |
Distinctive features | |||
| F2 | Air | 50 |
MS58, nickel-plated |
-10 to +80 | Type testing | |||
| F2 Sond.1 | 35 | Square flange | ||||||
| F2 M16x1,5 | 50 | Connection: M16x1,5 | ||||||
| F3 | 50 | 130 | 165 | 300 | -20 to +120 | Type testing | ||
| F3Ex | 50 | 130 | 165 | 300 | -25 to +110 | Ex zones 1 and 2* | ||
| F3 M16x1,5 | 50** | -20 to +120 | Connection: M16x1,5 | |||||
| F4 | 60 | 115 | 145 | PTFE | -20 to +90 | Food safe | ||
| F6 | Air/Water | 25 | 46 | 70 | 150 | V4A | -10 to +80 | Closed system |
| F7 | Air | 50 |
MS58, nickel-plated |
-10 to +80 | Low-cost solution | |||
| F7 Sond.1 | 165 | |||||||
| F8 | 50 | 130 | 165 | 300 | V4A | -20 to +250 | High temperatures | |
| F8-400°C | 50 | 130 | 165 | 300 | -20 to +400 | |||
| F8 M16x1,5 | 50** | -20 to +250 | Connection: M16x1,5 | |||||
| F9 | 50 | 165 |
MS58, nickel-plated |
-10 to +80 | Outer diameter 14mm | |||
*The requirements regarding simple electrical utilities applicable within areas exposed to explosion hazards due to gases in zone 1 according to EN 60079-11 are satisfied. For Ex zone 2 (Gas-Ex, Category 3G, EPL Gc) in the explosion groups IIA, IIB and IIC, surface temperature T4.
**Other immersion depths available upon request
|
Product no.: 50272
Airflow sensor Media temperature: -10°C to +80°C Immersion depth: approx. 50mm Process connection: PG7 Sensor material: MS58, nickel-plated Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW2A, NLSW45-3, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
85.00 €
*
Delivery weight: 200 g
Current daily price
|
|
|
|
|
Airflow sensor for gaseous media Media temperature: -20°C to +120°C Immersion depth: approx. 50mm (alternatively 130/165/300mm) Process connection: PG7 Sensor material: MS58, nickel-plated Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW2A, NLSW45-3, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
110.00 €
*
Delivery weight: 200 g
|
|
The flow sensors can be used as follows: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature > 135°C the equipment is not an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas- hazardous area of Zone 1 are met. Media temperature: -25°C to +110°C (depends on the flow monitor) Immersion depth: 50mm Process connection: PG7 Sensor material: MS58, nickel-plated Pressure resistance: 10bar Temperature class: T4 Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW45-3Ex |
286.00 €
*
Delivery weight: 210 g
|
|
Product no.: 56242
Airflow sensor Media temperature: -10°C to +80°C Immersion depth: approx. 35mm Process connection: flange Sensor material: MS58, nickel-plated Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW2AS3 WEEE-Reg.-Nr. DE 38909112 |
189.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 50311
Airflow sensor Media temperature: -10°C to +80°C Immersion depth: approx. 60mm (alternatively 115/145mm) Process connection: M12x1 Sensor material: Teflon Pressure resistance: 4bar Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Delivery without teflon screw nuts / optional accessory Suitable airflow monitors: NLSW2A, NLSW45-3, NLSW75A WEEE-Reg.-Nr. DE 38909112 |
171.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 80504
Airflow sensor Media temperature: -10°C to +80°C Immersion depth: approx. 50mm (alternatively 165mm) Process connection: PG7 Sensor material: MS58, nickel-plated Pressure resistance: 5bar Cable connectioni: 2.5m/3x0.5mm² Protection class: IP67 Suitable airflow monitor: NLSW45-5 WEEE-Reg.-Nr. DE 38909112
|
82.00 €
*
Delivery weight: 200 g
|
|
|
|
| Product no.: 76108 |
93.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 50272/M16
Airflow sensor Media temperature: -10°C to +80°C Immersion depth: approx. 50mm Process connection: M16x1.5 Protection category: IP67 Suitable airflow monitors: NLSW2A, NLSW45-3, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
92.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 50276/M16
Airflow sensor Media temperature: -20°C to +120°C Immersion depth: approx. 50mm Process connection: M16x1.5 Sensor material: MS58, nickel-plated Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW2A, NLSW45-3, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
118.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 76106/M16
Airflow sensor Media temperature: -20°C to +250°C Immersion depth: approx. 50mm Process connection: M16x1.5 Sensor material: stainless steel Pressure resistance: 10bar Cable connectioni: 2.5m/3x0.5mm² Protection class: IP50 Suitable airflow monitors: NLSW45-6, NLSW45-6.1 WEEE-Reg.-Nr. DE 38909112
|
152.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 76105
Flow sensor for air and water flows as well as cooling circuits with a maximum glycol content of 30% Media temperature: -10°C to +80°C Immersion depth: approx. 70mm Process connection: M14x1.5 Sensor material: V2A Pressure resistance: 20bar Process connection: 2.5m/4x0.34mm² Protection class: IP67 Suiting flow monitor: NLSW45-4 Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112
|
163.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 75104L
Flow sensor for air and water flows as well as cooling circuits with a maximum glycol content of 30% Media temperature: -10°C to +80°C Immersion depth: approx. 48mm Process connection: G1/4" Sensor material: V2A Pressure resistance: 20bar Process connection: 2.5m/4x0.34mm² Protection class: IP67 Suitable flow monitor: NLSW45-4 Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112
|
172.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 75105
Flow sensor for air and water flows as well as cooling circuits with a maximum glycol content of 30% Media temperature: -10°C to +80°C Immersion depth: approx. 46mm Process connection: G1/2" Sensor material: V2A Pressure resistance: 20bar Process connection: 2.5m/4x0.34mm² Protection class: IP67 Suitable flow monitor: NLSW45-4 Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112
|
179.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 75105/150
Flow sensor for air and water flows as well as cooling circuits with a maximum glycol content of 30% Media temperature: -10°C to +80°C Immersion depth: approx. 150mm Process connection: G1/2" Sensor material: V2A Pressure resistance: 20bar Process connection: 2.5m/4x0.34mm² Protection class: IP67 Suitable airflow monitor: NLSW45-4 Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112
|
214.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Airflow sensor for gasseous media Media temperature: -20°C to +250°C Immersion depth: approx. 50mm (alternatively 130/165/300mm) Process connection: PG7 Sensor tube material: stainless steel Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection class: IP50 Suitable airflow monitor: NLSW45-6 WEEE-Reg.-Nr. DE 38909112
|
142.00 €
*
Delivery weight: 200 g
|
|
Airflow sensor for gaseous media Media temperature: -20°C to +400°C Immersion depth: approx. 50mm (alternatively 130/165/300mm) Process connection: PG7 Sensor material: stainless steel Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection class: IP50 Suitable airflow monitor: NLSW45-6.1 WEEE-Reg.-Nr. DE 38909112
|
179.00 €
*
Delivery weight: 200 g
|
| Product no.: 76107 |
88.00 €
*
Delivery weight: 200 g
|
|
|
|
| Product no.: 76107/F2 |
84.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 75104
Air and water flow sensor Media temperature: -10...+80°C Immersion depth: approx. 25mm Process connection: G1/4" Sensor material: stainless steel V2A Pressure resistance: 20bar Connection cable: 2,5m/4x0,34mm² Protection class: IP67 Suitable flow monitor: NLSW45-4 Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112
|
179.00 €
*
Delivery weight: 200 g
|
|
|
|
|
Product no.: 76106/130
Airflow sensor Media temperature: -20°C to +250°C Immersion depth: 130mm Process connection: PG7 Sensor tube material: stainless steel Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection class: IP50 Suitable airflow monitor: NLSW45-6 WEEE-Reg.-Nr. DE 38909112
|
150.00 €
*
Delivery weight: 220 g
|
|
|
|
|
Product no.: 76106/150
Airflow sensor Media temperature: -20°C to +250°C Immersion depth: 165mm Process connection: PG7 Sensor material: stainless steel Pressure resistance: 10bar Cable connection: 2.5m/3x0.5mm² Protection class: IP50 Suitable airflow monitor: NLSW45-6 WEEE-Reg.-Nr. DE 38909112
|
159.00 €
*
Delivery weight: 250 g
|
|
|
|
|
Product no.: 76106/300
Airflow sensor Media temperature: -20°C to +250°C Immersion depth: 300mm Process connection: PG7 Sensor tube material: stainless steel Pressure resistance: 10bar Cable connectioni: 2.5m/3x0.5mm² Protection class: IP50 Suitable arflow monitor: NLSW45-6 WEEE-Reg.-Nr. DE 38909112
|
179.00 €
*
Delivery weight: 280 g
|
|
|
|
|
Product no.: 50276/130
Airflow sensor Media temperature: -20...+120°C Immersion depth: approx. 130mm Process connection: PG7 Sensor housing material: MS58, nickel-plated Pressure resistance: 10bar Cable connection: 2,5 m length, 3x 0,5mm² Protection category: IP67 Suitable airflow monitors: NLSW45-3, NLSW2A, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
117.00 €
*
Delivery weight: 0.25 kg
|
|
|
|
|
Product no.: 50276/150
irflow sensor Media temperature: -20...+120°C Immersion depth: 165mm Process connection: PG7 Sensor housing material: MS58, nickel plated Pressure resistance: 10bar Cable connection: 2,5m 3x0,5mm² Protection category: IP67 Suitable airflow monitors: NLSW45-3, NLSW2A, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
126.00 €
*
Delivery weight: 0.27 kg
|
|
|
|
|
Product no.: 50276/300
Airflow sensor Media temperature: -20...+120°C Immersion depth: approx. 300mm Process connection: PG7 Sensor material: MS58, nickel plated Pressure resistance: 10bar Cable connection: 2,5m 3x0,5mm² Protection category: IP67 Suitable airflow monitors: NLSW45-3, NLSW2A, NLSW75A Building class tested and approved by TÜVNORD complying to DIN EN 61010-1:2011-07, Tested at 27.02.2018 WEEE-Reg.-Nr. DE 38909112 |
140.00 €
*
Delivery weight: 0.32 kg
|
|
|
|
|
Product no.: Zubehör
Accessories for airflow sensors and RLSW-housing Mounting flange, reducer, wall mounting set WEEE-Reg.-Nr. DE 38909112 |
|
|
Product no.: 76106/150/400°C
Airflow sensor Media temperature: -20...+400°C Immersion depth: approx. 165mm Process connection: PG7 Suitable monitor: NLSW45-6.1 WEEE-Reg.-Nr. DE 38909112
|
223.00 €
*
Delivery weight: 0.25 kg
|
|
|
|
|
Product no.: 76106/130/400°C
Air flow sensor Media temperature: -20...+400°C Immersion depth: approx. 130mm Process connection: PG7 Suitable monitor: NLSW45-6.1 WEEE-Reg.-Nr. DE 38909112
|
214.00 €
*
Delivery weight: 0.26 kg
|
|
|
|
|
Product no.: 76106/300/400°C
Airflow sensor for gaseous media Media temperature: -20...+400°C Immersion depth: about 300mm Process connection: PG7 Suitable airflow monitor: NLSW45-6.1 WEEE-Reg.-Nr. DE 38909112
|
244.00 €
*
Delivery weight: 0.35 kg
|
|
|
|
|
Product no.: 69830
Airflow sensor for gaseous media Media temperature: -20°C to +90°C Immersion depth: approx. 145mm (alternatively 60/115mm) Process connection: sensor tube 12mm Sensor material: Teflon Pressure resistance: 6bar Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW2A, NLSW45-3, NLSW75A WEEE-Reg.-Nr. DE 38909112 |
188.00 €
*
Delivery weight: 230 g
|
|
|
|
| 1 - 30 of 33 results |
|