SEIKOM-Electronic GmbH & Co. KG
SEIKOM-Electronic GmbH & Co. KG Airflow Meters and Sensors for Explosive Areas
Airflow Meters and Sensors for Explosive Areas
|
The monitor NLSW45-3Ex is used with two Z-barriers (included in delivery) and flow sensors F3.*Ex.The flow sensors can be used as follows: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature > 135°C the equipment is not an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas- hazardous area of Zone 1 are met. The NLSW45-3Ex must be installed outisde of the explosive area. Operating voltage: 24V AC (alternatively available 24V DC or 115/ 230V AC) Power consumption: 4VA Signal output flow: 1x changer Current and contact capacitance: 250VAC, 10A, 2.5kVA Media temperature: 0°C to +60°C Switch-point: adjustable with potentiometer Measurement range: approx. 0.1m/s to 20m/s Cabinet dimensions (LxWxB): 120mmx5mmx73mm Suitable sensors: F3Ex, F3.1Ex, F3.2Ex, F3.3Ex (not included in delivery) WEEE-Reg.-Nr. DE 38909112 |
516.00 €
*
Delivery weight: 390 g
|
|
The flow sensors can be used as follows: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature > 135°C the equipment is not an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas- hazardous area of Zone 1 are met. Media temperature: -25°C to +110°C (depends on the flow monitor) Immersion depth: 50mm Process connection: PG7 Sensor material: MS58, nickel-plated Pressure resistance: 10bar Temperature class: T4 Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW45-3Ex |
286.00 €
*
Delivery weight: 210 g
|
|
Product no.: 60620/Ex
The flow monitor NLSW45-3Ex is used with two Z-barriers (included in delivery) and flow sensors F3.*Ex. Applicable range of the flow sensors: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. Its unique feature is the analogue signal output. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature >135°C the equipment does not present an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas-hazardous area of Zone 1 are met. The NLSW75-AEx must be installed outside of the explosive area. Power consumption (max.): 5VA/W Signal output flow: 1x changer, 0 - 10 V and 4 - 20mA Current and contact capacitance: 250VAC, 6A, 1,5kVA Media temperature: 0°C to +60°C Switch-point: adjustable via potentiometer Measurement range: approx. 0.5m/s to 20m/s Cabinet dimensions (LxWxB): 112mmx75mmx73mm Suitable sensors: F3Ex, F3.1Ex, F3.2Ex, F3.3Ex (not included in delivery) WEEE-Reg.-Nr. DE 38909112 |
641.00 €
*
Delivery weight: 650 g
|
|
Product no.: 70789/AC/Ex
The flow monitor NLSW45-3Ex is used with two Z-barriers (included in delivery) and flow sensors F3.*Ex. Applicable range of the flow sensors: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. Its unique feature is the analogue signal output. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature >135°C the equipment does not present an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas-hazardous area of Zone 1 are met. The NLSW75-AEx must be installed outside of the explosive area. Operating voltage: 24V AC (alternatively available 24V DC or 115/ 230V AC) Power consumption (max.): 5VA/W Signal output flow: 1x changer, 0 - 10 V and 4 - 20mA Current and contact capacitance: 250VAC, 6A, 1,5kVA Media temperature: 0°C to +60°C Switch-point: adjustable via potentiometer Measurement range: approx. 0.5m/s to 20m/s Cabinet dimensions (LxWxB): 112mmx75mmx73mm Suitable sensors: F3Ex, F3.1Ex, F3.2Ex, F3.3Ex (not included in delivery) WEEE-Reg.-Nr. DE 38909112 |
641.00 €
*
Delivery weight: 650 g
|
|
Product no.: 70789/DC/Ex
The flow monitor NLSW45-3Ex is used with two Z-barriers (included in delivery) and flow sensors F3.*Ex. Applicable range of the flow sensors: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. Its unique feature is the analogue signal output. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature >135°C the equipment does not present an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas-hazardous area of Zone 1 are met. The NLSW75-AEx must be installed outside of the explosive area. Operating voltage: 24V DC (alternatively available 24V AC or 115/ 230V AC) Power consumption (max.): 5VA/W Signal output flow: 1x changer, 0 - 10 V and 4 - 20mA Current and contact capacitance: 250VAC, 6A, 1,5kVA Media temperature: 0°C to +60°C Switch-point: adjustable via potentiometer Measurement range: approx. 0.5m/s to 20m/s Cabinet dimensions (LxWxB): 112mmx75mmx73mm Suitable sensors: F3Ex, F3.1Ex, F3.2Ex, F3.3Ex (not included in delivery) WEEE-Reg.-Nr. DE 38909112 |
641.00 €
*
Delivery weight: 650 g
|
|
Product no.: 77029/DC/Ex/SIL1
The flow monitor NLSW45-3Ex SIL1 is used with two Z-barriers Gg (included in delivery) and flow sensors F3.*Ex SIL1. Applicable range of the flow sensors: In zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature >135°C the equipment does not present an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas-hazardous area of zone 1 are met. The NLSW45-3Ex SIL1 must be installed outside of the explosive area. SIL1 classified by exida Operating voltage: 24V DC (alternatively available 24V AC or 230V AC) Power consumption: 4VA Signal output flow: 1x changer Current and contact capacitance: 250VAC, 10A, 2.5kVA Media temperature: 0°C to +60°C Switch-point: adjustable via potentiometer Measurement range: approx. 0.1m/s to 20m/s Cabinet dimensions (LxWxB): 120mmx5mmx73mm Suitable sensors: F3Ex SIL1, F3.1Ex SIL1, F3.2Ex SIL1, F3.3Ex SIL1 (not included in delivery) WEEE-Reg.-Nr. DE 38909112
|
597.00 €
*
Delivery weight: 450 g
|
|
Product no.: 77029/AC/Ex/SIL1
The flow monitor NLSW45-3Ex SIL1 is used with two Z-barriers Gg (included in delivery) and flow sensors F3.*Ex SIL1. Applicable range of the flow sensors: In zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature >135°C the equipment does not present an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas-hazardous area of zone 1 are met. The NLSW45-3Ex SIL1 must be installed outside of the explosive area. SIL1 classified by exida Operating voltage: 24V AC (alternatively available 24V DC or 230V AC) Power consumption: 4VA Signal output flow: 1x changer Current and contact capacitance: 250VAC, 10A, 2.5kVA Media temperature: 0°C to +60°C Switch-point: adjustable via potentiometer Measurement range: approx. 0.1m/s to 20m/s Cabinet dimensions (LxWxB): 120mmx5mmx73mm Suitable sensors: F3Ex SIL1, F3.1Ex SIL1, F3.2Ex SIL1, F3.3Ex SIL1 (not included in delivery) WEEE-Reg.-Nr. DE 38909112
|
597.00 €
*
Delivery weight: 450 g
|
|
Product no.: 63377/Ex/SIL1
The flow monitor NLSW45-3Ex SIL1 is used with two Z-barriers Gg (included in delivery) and flow sensors F3.*Ex SIL1. Applicable range of the flow sensors: In zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature >135°C the equipment does not present an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas-hazardous area of zone 1 are met. The NLSW45-3Ex SIL1 must be installed outside of the explosive area. SIL1 classified by exida Operating voltage: 230V AC (alternatively available 24V AC or 24V DC) Power consumption: 4,5VA Signal output flow: 1x changer Current and contact capacitance: 250VAC, 10A, 2.5kVA Media temperature: 0°C to +60°C Switch-point: adjustable via potentiometer Measurement range: approx. 0.1m/s to 20m/s Cabinet dimensions (LxWxB): 120mmx5mmx73mm Suitable sensors: F3Ex SIL1, F3.1Ex SIL1, F3.2Ex SIL1, F3.3Ex SIL1 (not included in delivery) WEEE-Reg.-Nr. DE 38909112
|
597.00 €
*
Delivery weight: 450 g
|
|
The flow sensors can be used as follows: In Zone 2 (Gas, Category 3G, EPL Gc) in the explosion groups IIA, IIB, and IIC. The qualification with regard to the surface temperature is T4; for all gases, vapours and mists with an ignition temperature > 135°C the equipment is not an ignition source. The requirements for simple electrical apparatus according to IEC60079-11, valid for the gas- hazardous area of Zone 1 are met. Media temperature: -25°C to +110°C (depends on the flow monitor) Immersion depth: 50mm Process connection: PG7 Sensor material: MS58, nickel-plated Pressure resistance: 10bar Temperature class: T4 Cable connection: 2.5m/3x0.5mm² Protection category: IP67 Suitable airflow monitors: NLSW45-3Ex SIL1 |
329.00 €
*
Delivery weight: 210 g
|